Home About Us Products Contact Us

Tel: +44 (0)1427 614141

On the 5th October 2021 Regal Beloit Corporation became Regal Rexnord Corporation

Regal Manufacturing Ltd

Part of the Regal Rexnord Corporation

Regal Manufacturing Ltd

Marshall Way, Gainsborough, Lincolnshire, DN21 1XU, UK

TEL : +44 1427 614141  EMAIL : enquiries2021@regalmanufacturing.co.uk


Part of the Regal Rexnord Corporation

© 2021 Regal Manufacturing Ltd

Opperman Pension

Privacy Policy / modern slavery act  

slavery_policy.pdf opperman_pension.pdf Home

Well-established in the Fasco UK range of  motors available from Gainsborough, the 'J' frame PSC motor offers additional possibilities for air moving applications, and creates additional opportunities for business machine, and pump manufacturers and users.

The 'J' frame motor is a shell constructed motor, with ball bearings and cast aluminium end shields, permitting great variety in the combinations of face mounting spigots and mounting hole positions available. Shaft diameters up to 12.7mm are available as standard. Ventilated body shells with internal fans, and TEFC bodies allow the motor to be self cooled, enabling its use in pump and business machine applications with output requirements up to 150 watts at 2 pole speed. Motors are also available with lower ratings at 4 pole speed.


2 and 4 pole operation, with CE, CSA and UL Approvals available

All motors may be designed for optional voltages and frequencies.

Standard Options

Shaft

Single or Double Extension

Plain or Milled Flat,

Threaded

Mountings

Face Mounting Spigots

Foot Mounting


Bearing Type

Ball bearing



Body construction

Ventilated

totally enclosed

fan-cooled

The C-Frame shaded pole motor represents the workhorse of the Fasco UK range in many medium sized ventilation and heating applications.


The large sleeve bearing system provides excellent support for heavy loads such as larger propeller fans and centrifugal blowers.

Oil reservoirs on the sleeve bearing motors are among the largest in the industry ensuring long service life with a minimum of maintenance.

Reluctance slot laminations provide a high ratio of starting to running torque allowing a fast, smooth pull-up.

Both ventilated and totally enclosed cases are standard, and the 'C' frame is ideal for resiliently mounted duties, such as fan coils and air conditioning evaporators.


Standard Options

Shaft

Single or Double Extension

Plain or Milled Flat,

Threaded

Keyway

Mountings

Casebolt mounting,

stud fixing

body band suspension

Resilient Base

Bearing Type

Ball bearing

sleeve bearing



Body construction

Ventilated

totally enclosed

fan-cooled


Standard Options

Now firmly established as a regular and popular member of the Regal Manufacturing Products range of motors available at Gainsborough, the 'C' frame PSC motor offers exciting new possibilities for fan and blower manufacturers and users. Of similar construction to its well established, and enduring shaded pole partner, the 'C' frame PSC motors is designed for high performance applications.


These motors combine energy savings with maximum performance and reliability.

Shaft

Single or Double Extension

Plain or Milled Flat,

Threaded


Mountings

Casebolt mounting,

stud fixing

body band suspension

Brackets / Bases

Bearing Type

Ball bearing

sleeve bearing



Body construction

Ventilated

totally enclosed

fan-cooled


4 and 6 pole operation, with CE, CSA and UL Approvals available

All motors may be designed for optional voltages and frequencies.


4 and 6 pole operation.

CE, CSA and UL Approvals available

All motors may be designed for optional voltages and frequencies.

PSC motors are ideal in situations requiring energy conservation. Greater horsepower can be developed from a given mass of iron and copper, with lower power consumption, and a higher power factor than can be realised from a shaded pole or split phase motor.

Available in four and six pole versions, the 'D' frame motor is among the most versatile in the industry. Windings can be produced for all supply systems, with multi-speed and reversible operation facilities as standard options. Low noise levels and resilient mounting make these motors favourites within the air conditioning and heating markets.

Bearing systems include free self-aligning spherical sleeve designs and resiliently mounted heavy duty ball races.


Standard Options

Shaft

Single or Double Extension

Plain or Milled Flat,

Threaded


Mountings

Casebolt mounting,

stud fixing

Brackets

Bases

Bearing Type

Ball bearing

sleeve bearing



Body construction

Ventilated

totally enclosed



4 and 6 pole operation, with CE, CSA and UL Approvals available

All motors may be designed for optional voltages and frequencies.


2 and 4 pole operation, with UKCA, UKNI, CE, CSA and UL Approvals available

All motors may be designed for optional voltages and frequencies.

Standard Options

Case constructed motors provide strong bodied units suitable either for casebolt mounting, stud fixing or body band suspension.

The shaded pole design provides maximum performance and reliability at competitive costs. Particular attention is paid to smooth operation and low noise levels.


Shaft

Single or Double Extension

Plain or Milled Flat,

Threaded

Mountings

Casebolt mounting,

stud fixing


Bearing Type

Ball bearing

sleeve bearing


Body construction

Ventilated

totally enclosed

fan-cooled

Typical Applications

Circulating and Dispensing Pumps

Vacuum Pumps

Compressors

Business Machines

Medical Equipment

Small Machine Tools.



Typical Applications

Condenser fans.

Pumps.

Business machines.

Agitators.

Air conditioners

Tape drives.

Air cleaners.

Evaporative coolers.

Walk in coolers.

Medical equipment.

Hand Dryers

Electronic cooling

Heat pumps.

Vending machines.

Draught inducers.

Oil and gas burners.


Typical Applications

Room Air Conditioners.

Direct Drive Blowers.

Warm Air Central Heating.

General Blowers.

entliation Fans.

Garage Door and Gate Openers.

Unit Heaters.

Roof Ventilators.

Condensor Fans.

Dehumidifiers.



Ideal for any applications requiring a compact, efficient motor with good speed stability, and the suitability to operate with speed control devices.


2 and 4 pole operation, with UKCA, UKNI, CE, CSA and UL Approvals available

All motors may be designed for optional voltages and frequencies.

Standard Options

Typical Applications

Condenser fans.

Pumps

Business machines.

Agitators

Air conditioners

Air cleaners

Evaporative coolers

Walk in coolers

Medical equipment

Hand Dryers

Heat pumps

Vending machines

Draught inducers

Unit heaters.

Oil and gas burners

Tape drives

Electronic cooling

The permanent split capacitor motor, with its higher efficiency and improved power factor achieves a better utilization of electrical energy than its comparable shaded pole equivalent.

More power may therefore be drawn from the motor within a given space, permitting use where problems are encountered with current or temperature rise limitations.




Shaft

Single or Double Extension

Plain or Milled Flat,

Threaded

Mountings

Casebolt mounting,

stud fixing

Flanges and Foot Mountings

Bearing Type

Ball bearing

sleeve bearing


Body construction

Ventilated

totally enclosed

fan-cooled

Typical Applications

Air Conditioning

Heat Pumps

Fan Coil Convectors

Direct Drive Blowers

Electronic Cooling

Welding Equipment

Unit Heaters

Business Machines

Garage Door Openers

Walk In Coolers

Roof Ventilators

Fans

Air Curtains

Pumps

Compressors

Dehumidifiers

Exhaust Fans.


Our OEM motors are talior made to fit the OEM customer's application.  Our UK based Engineering Design team WILL work with you to ensure the motor meets your individual needs.


Our UK Fasco range come in the following sizes

83mm dia

Shaded Pole


86mm dia

P.S.C.


108mm dia

P.S.C.


108mm dia

Shaded Pole


128mm dia

P.S.C.


60mm square

SP Skeletal


83mm dia

P.S.C.


We are the original manufacturer of A.O. Smith and MagneTek Universal Electric motors

so you know you are getting quality motors that will full fill your needs.

Since we joined the Regal Rexnord Corporation these motors have been branded with the FASCO logo.

FHP Electric Motors manufactured in the U.K.

Typical Applications

Condenser fans

Cooker hoods

Bathroom/kitchen ventilators

Pumps. Humidifiers

Dehumidifiers

Refrigerated chillers and cabinets Vending machines

Medical/Laboratory equipment

Evaporators Heaters

Draught inducers

Electronic cooling

Business machines

Warm air central heating


A-Frame Shaded Pole

83mm (3.25") O.D.

3 - 50 Watts Output,

Shaded Pole Motor

Case Constructed

A-Frame PSC

83mm (3.25") O.D.

10 - 125 Watts Output,

Permanent Split Capacitor

Case Constructed

J-Frame PSC

86mm (3.28") O.D.

10 - 150Watts Output,

Permanent Split Capacitor

Shell Constructed

C-Frame Shaded Pole

108mm (3425") O.D.

10 - 150Watts Output,

Shaded Pole

Case Constructed

C-Frame PSC

108mm (4.25") O.D.

20 - 186Watts Output,

Permanent Split Capacitor

Case Constructed

D-Frame PSC

128mm (5.06") O.D.

30 - 250Watts Output,

Permanent Split Capacitor

Case Constructed